Tag Archives: flatware

flatware

Ambiente 2014

Ambiente 2014

Ambiente - Frankfurt 2014
EME AT AMBIENTE 2014
HALL 3.0 – STAND E76

The HOMI Trade Fair finished yesterday.

I must say that I went to this fair with grave doubts. I believed that HOMI could never recuperate the lost ground made by past fair administrators of doubted ability and interfering politicians.

I was proved to be wrong. Ok we did not have 4 days of intense business 2 business, but we did have a group of foreign visitors that greatly appreciated the new format, and were well qualified!

I am more than prepared to bet that next year will even be better, returning an “old Macef” that was almost dead, into a young and vibrant HOMI that will once again return to the top of the list of international fairs.

Ambiente is almost upon us. I, John L Aldridge – Export Manager, will be available throughout the fair, so should you require answers to any questions regarding  our  Company or our production, please do not hesitate to come and ask me. Remember “Your time is our time”, so please feel free to visit us.

Please note that we are always pleased to meet new potential clients, but we have particular openings in the following countries:

Russia, Estonia, Lithuania, Latvia, Ukraine, Sweden, China, and Portugal.

Share Button

HOMI-Macef and Ambiente 2014 Trade Fairs

HOMI-Macef and Ambiente 2014 Trade Fairs

 

Ambiente - Frankfurt 2014
EME AT AMBIENTE 2014
HALL 3.0 – STAND E76
logo-homi.macef
Eme at HOMI-MACEF 2014
PAD 4 – STAND G30
19 – 22/01/2014

EME Posaterie Srl will once again be exhibiting at HOMI and Ambiente.

We are looking forward to receiving one and all, and will do our very best to answers any questions that you may have concerning our Company or our production.

Your time is our time, so please feel free to visit us.

John L Aldridge (Export Manager) will be available through out both fairs.

Please note that we are always pleased to meet new potential clients, but we have particular openings in the following countries:

Russia, Estonia, Lithuania, Latvia, Ukraine, Sweden, and Portugal.

Share Button

Eme at Tendence Expo Fair, Prague with Demdaco

Demdaco – Prague

Although we at Eme do our very best to promote our products around the world, we often have the pleasure of relying on our Agents and Importers to exhibit for us.

In the case of the recent Tendence Expo Fair in Prague, held at the Holesovice Fairgound (13 – 16.9.2012), we had the pleasure of working with our importer for the Czech Republic:

Demdaco-Eme at Tendence, Prague 2012

Demdaco CZ
Tel.: +420 603 791 833
Rostislavova 528, 683 23 Ivanovice na Hane
Czech Republic
Tel.: +420 603 791 833
Fax: +420 517 363 803
www.demdaco.cz
www.lapetitefrance.cz

Demdaco has a long standing experience in working in the Houseware/Table Top sector, and I am sure that if you have any questions regarding the Czech market, Demdaco will have the answers for you.

Demdaco are also importers for:

Enesco • Pimpernel • Portmeirion • Robert Opie • Denby
Le Chatelard 1802 • Scottish Fine Soaps • Le Blanc • LENOX

 

Demdaco-Eme at Tendence, Prague 2012
Share Button

Eme at Ambiente and Macef 2013 Trade Fairs

Ambiente and Macef 2013 Trade Fairs

As per every year, we are pleased to inform our clients, and future clients, that we will be exhibiting at the Ambiente and Macef Trade Fairs 2013.

We will be launching a new range of our very successful model VERO, plus the possibility of some new colours for Napoleon.

International Trade Fairs 2013
Ambiente and Macef Trade Fairs 2013

For those that visited Maison & Objet, I am sure that you will agree with me that this fair is becoming ever more important to our sector of business.

Many have asked why Eme was not present? Well I can answer this question by informing our clients that we are considering the matter. However, it must be remembered that we are an Italian Company that must show some allegiance to our own national trade fair (Macef) where many of our national clients take the opportunity to visit us. Also we are fighting to keep our costs under control so that we can continue to create new ideas, and what is more important, keep our prices firm.

We are living in very turbulent times, financially and politically. Therefore it is only right that Eme tries to do its very best in offering a little bit of stability. Continuing to offer pricing stability, fast delivery times, and innovative products.

At a later date, I will be confirming our stand positions.

If you need information about our production, please do not wait until the fairs; please contact me immediately.

International Trade Fairs 2013

Share Button

July Promotion Cromoterapia Cookware

FOR A LIMITED PERIOD ONLY, ON TOP OF YOUR STANDARD DISCOUNT, WE ARE GOING TO OFFER AN EXTRA 20% DISCOUNT ON OUR RANGE OF CROMOTERAPIA COOKWARE!

TO OBTAIN THE DISCOUNT, ALL YOU HAVE TO DO IS BUY 1 OF OUR DISPLAY STANDS, COMPLETE WITH OUR RANGE OF COOKWARE.

THE STAND IS INCLUDED FREE OF CHARGE!

IF YOU WANT TO KNOW MORE, PLEASE SEND ME AN EMAIL REQUESTING FURTHER INFORMATION.

Promotion CROMOTERAPIA Cookware
Promotion CROMOTERAPIA Cookware

 

 

 

Share Button

MACEF Trade Fair 2012 – 26th to 29th January 2012

I am pleased to inform you that apart from the Ambiente Trade Fair, we will also be exhibiting at the Macef trade fair that is held in Milan (Rho) – http://www.macef.it PAD1, STAND R17 S20.

I hope to have the pleasure of seeing you there.

Should you require further information, please do not hesitate to contact me.

Share Button

New Design Packing – You & Me

Design Packing from Eme

Share Button

Ambiente Trade Fair – 10th to 14th February 2012

Hall 3.0, Stand E76 – www.ambiente.messefrankfurt.com/

Eme will be exhibiting this year at the Ambiente Trade Fair with a completely new stand.

I hope that we will have the pleasure of your presence during the fair.

We have plenty of new models and ideas to show you.

Share Button

This model will be on display during Macef and Ambiente Trade Fairs

Sky Full Tang Cutlery - Flateware Model

Further new models will be published over the next coming days.

Share Button

Introduction to Cutlery and Flatware Part 2

 

There are plastics and plastics. Unfortunately the word plastic is a word that is generally used by the consumer to underline a product that is cheap, or of poor quality. This is in fact not true as some plastics can cost more than crystal.

Plastic as a raw material can be subdivided into two categories:

1st Choice

2nd Choice

1st Choice is when the raw material is produced by a manufacturer, and supplied with full quality certification to a manufacturer that will transform the material into a finished or semi-finished product.

2nd Choice is when a manufacture collects the waste material that remains after the initial production cycle, or after the transformation, and re-cycles the material. A good example is the cartons used for milk and orange juice. Between the 2 layers of card is a layer of plastic film. At the end of a production run, a block of plastic remains. This plastic is sold and recycled for the production of children’s dolls.

There is also a 3rd Choice that is usually used by Chinese producers. This plastic is a mixture of all possible types of waste plastics, with no certification that it can be used in contact with food.

Eme uses at present the following types of 1st Choice plastics:

Moplan

ABS

Marfran Streif

Metal acrylic

Nylon

  • Moplan: A very cheap and soft plastic used for economical ranges of cutlery.
  • ABS: A harder plastic that is also resilient to temperature. Has an advantage that it mixes well with colorants.
  • Marfran Streif: A special plastic made from ABS and rubber. Made to German standard B.G.A.: Mitteilung N.170.
  • Metal acyrlic: An expensive plastic that is extremely hard and resilient. Has the advantage of being able to form special colour effects, and to be able to maintain its lucidity.
  • Nylon: Normally used when printed a decor onto the handle using “sublimation” printing.

 

 

Silver plated cutlery is divided into two groups; domestic and hotel/catering.

Domestic cutlery has a base layer of 5 microns of Woods Nickel, and 5 microns of silver. Hotel/Catering cutlery has the same base of nickel but with 23 microns of silver.

  • Gold Plated Cutlery.

 

Unlike silver plated cutlery that with the exception of the knife blade covers the whole body of the cutlery piece, gold plated is used basically as a form of ornamentation, or to evidence a motif.

  • Maintenance and problems.

 

To maintain the life and beauty of our cutlery, we suggest the following:

Maintenance:

  1. After washing by hand, do not leave the cutlery on the side to dry. Dry immediately with a cloth and store away. Soupy water that is allowed to dry on the surface of steel can cause oxidation marks that appear to be rust. It is not rust and can be normally removed with any stainless steel cleaner.
  2. After the cycle of the dishwasher has terminated, remove, and if dry, store away. If you are in a hurry, leave the door of the dishwasher open so that air can circulate. The atmosphere within a dishwasher is very corrosive as it contains a high percentage of salt.
  3. Wherever possible, do not leave food to dry on the stainless steel. Food decays very quickly creating acids that attack the surface of the cutlery. This is even more important where lemon has been used. This is one of nature’s great little acids.

Problems:

  1. If black marks or pit marks can be seen on the surface, and if these marks are very noticeable on the edge of the knife blade, this is a very good sign that the dishwasher of the client is not properly earthed. When a dishwasher is not earthed, during its cycle electrical discharges are created that attack the edges of steel, and especially the blade edges. Add to this a very corrosive atmosphere (100% humidity and salt), faint rust marks will appear around the pit marks.
  2. The stainless steel has a white chalky appearance, and the plastic stains of white. This is a very clear sign that the cutlery has been boiled. When water reaches its boiling point, it releases a certain amount of calcium that deposits onto the surface of the steel causing it to have a chalky appearance. Plastic at 100 degrees Celsius begins to suffer from thermal stress causing the white stains. If the cutlery is removed from the boiling water and immediately placed under cold water, cracks will begin to show near the joint between the handle and steel.
Share Button